Garage Door Spring Installation in Ottawa

    Is your garage door not opening or stuck wide open? Looking for a professional repair technician?

    Ottawa’s best garage door repair technician company. CALL ☎️ (613) 706-1104

    Or, fill out this form.

    Garage Door Spring Installation in Ottawa

    Our Work Gallery...​

    Performing a garage door spring installation can sometimes be a daunting task, especially to those who cannot handle maintenance very well.

    But with a proper set of tools and a little familiarity with garage door restorations, it will once again function much better than ever.

    Fixing and maintaining garage doors is a simple mandatory work, especially to those neighborhoods who are highly deterrent in securing their household and, of course, their home.

    And when it comes to installing the garage door spring, an easy, quick-fix can do the trick, just as long as the proper tools, as well as the designated spring installation, is present when it comes to garage door improvements.

    Make sure to read and follow these quick tips and collective procedures in terms of garage door spring installation in Ottawa for a proper and more conventional garage door.

    Make sure what garage door springs to use

    Before installing the springs for the garage doors, see that the springs to be installed are the same as those that need replacing.

    For garage doors to work, they mostly utilize two different types of springs:

    Torsion Springs are the most common springs that are usually fixated and installed on newly established garage doors.

    When performing garage door improvements involving the springs, torsion springs can be tricky and may impart unfortunate instances, especially when installed inaccurately.

    Also, see to it that the new tension springs are properly coiled up and rigged accordingly.

    It is highly recommended to have a professional help install these types of garage door springs, or at least ample knowledge and a set of proper tools to install it by yourself.

    Extension Springs are another type of spring that runs alongside the garage doors.

    These springs extend outwards to be able to close and open the garage doors.

    It can be a bit costly as garage door tune-ups usually need up to two extension springs on either side of the garage door, especially if the garage doors are heavy and massive.

    Regardless of the different aspects of both of these door springs, these springs serve the same action of lifting the heavy garage door so that it could easily open or close.

    Garage door tune-ups can be quite confusing, but that should not interfere with the process of patching the garage doors.

    Companies such as the Garagedocdoor provides extensive information on various springs to use in any specific garage door tune-ups.

    The Garagedocdoor is definitely here to help anyone who is in dire need of various garage door spring adjustments.

    Installation of garage door springs

    Tension Springs are a fundamental choice if the garage doors are not that bulky or heavy, since it promises a more safety and durable component.

    When performing a garage door spring installation, ensure that the springs are securely attached and thoroughly positioned to avoid more garage door emergencies.

    Look up into these following guidelines in installing garage door springs:

    Take note of the wood anchor to be used at the center garage door opening.

    Look for a more sturdy or a more comprehensive block such as a grade 2 or better yellow pine, beech, birch, oak, or hickory woodblocks.

    In assembling the torsion springs to the spring tube, make sure to be more familiarized with the spring pieces.

    For instance, the spring coils of the tension spring are usually color-coded for users to determine the spring size of the tension spring (typically red or black).

    Winding cones of the tension springs are color-coded to identify which side of the door should the spring be attached to.

    Varying screws and nuts are used depending on the plate’s position, to which the assembled tension springs can now be replaced and mounted.

    Use winding bars to adjust the torsion springs in place.

    Make sure not to modify the mounted torsion springs too tightly as it may cause severe problems with the coils, the tension springs, as well as the garage door.

    Be sure that it is installed nice and tight, but not too tight.

    Safety precautions and other measures

    Do not attempt to use other susceptible tools such as screwdrivers or wrenches for the winding bars.

    It is best to insert the bars inside the hole and secure each spring with the tension spring winding cone.

    Carefully test the garage door by cautiously raising the door halfway open.

    Be sure to go all the way through, as there could be other underlying problems that might have been missed, such as loosed screws, improper attachment of the spring, or wrong spring diameter.

    Try to proceed slowly and delicately since new parts of the garage door are installed.

    When in doubt, call the nearest garage door company in Ottawa.

    Look for a Garagedocdoor in that specific area that aids with overhead or garage door repairs.

    Garagedocdoor also provides various sets of tools and other equipment to help with multiple garage door emergencies.

    Visit the website to initiate with their customer service providers, and don’t forget to sign up with exclusive maintenance offers and utility services for any garage door repairs at home.

    5/5 - (1 vote)
    Peter MacDonald

    Peter MacDonald

    I have been servicing garage doors since I can remember. Over the years I noticed I can help my clients better if they get detailed answers to their questions beforehand. In this blog I share my tips and thoughts so you can better understand the issue you might be facing and my companies approach to fix it.

    Contact Us
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar